Anritsu S331C Guia do Utilizador descarregar pdf (Página 69)

Site Master User Guide PN: 10580-00252 Rev. A 6-1

Chapter 6 — GPS (Option 31)

6-1 Introduction

The Site Master is available with a built-in GPS receiver feature (Option 31) that can provide

latitude, longitude, altitude, and UTC timing information. This option also enhances

frequency reference oscillator accuracy in the spectrum analyzer mode (S332E/S362E).

Within three minutes of satellite acquisition, the reference oscillator will have an accuracy of

better than 50 ppb (parts per billion).

In order to acquire data from the GPS satellites, the user must have line-of-sight to the

satellites or the antenna must be placed outside without any obstructions. Anritsu GPS

antenna 2000-1528-R is required.

6-2 Chapter Overview

• Section 6-3 “Activating the GPS Feature” on page 6-1

• Section 6-4 “Saving and Recalling Traces with GSP Information” on page 6-3

• Section 6-5 “GPS Menu” on page 6-4

6-3 Activating the GPS Feature

Install the Anritsu GPS antenna onto the GPS Antenna connector on the Site Master.

1. Press the Shift key, then the System (8) key.

2. Press the GPS submenu key.

3. Press the GPS On/Off submenu key to toggle the GPS feature on or off. When GPS is

first turned on, a RED GPS icon will be appear at the top of the display.

Figure 6-1. GPS Icon, Red

GPS

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 81 82

Sem comentários

Anritsu S331C Guia do Utilizador Página 69